IEEE 802.3at/af Power over Ethernet Standard
The GS-5008PL features 8 IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30W of electricity per port, and has a total power supply of 150 W to power any 802.3at or 802.3af compliant power device. With PoE detection capability, the GS-5008PL is able to verify whether the connected device is IEEE 802.3at or 802.3af compliant. In the event that a PoE device is not detected, only network data will be transmitted through the LAN cable. The GS-5008PL can be used with different PoE products such as access points, network cameras or VoIP devices and is an effective solution for network environments where power outlets are difficult to access.
PoE for Easy Installation and Better Cost Efficiency
Power over Ethernet technology enables the Ethernet cable to carry both data and power, reducing cable installation and eliminating the need for extension cords or electrical outlets on the walls and ceiling. Overall the GS-5008PL can lower installation costs and simplify the deployment effort.
Power-Budget User Interface for PoE Device Management
The GS-5008PL features an innovative power-budget UI (user interface) which allows IT managers to monitor the power consumption of each PoE port and the total power consumption of connected PoE devices. Monitor the entire PoE network and assess the total power usage before adding new PoE devices to the network architecture. The power-budget UI also features a remote on/off function for each PoE port, so manual plug/unplug isn’t necessary when a PoE device hangs. Simply use the remote power button to quickly reset the device.
Smart Tools for Improved Network Efficiency
The GS-5008PL features smart network monitoring tools that allow for improved network efficiency. Security and management features include bandwidth control and VLAN (IEEE 802.1Q VLAN tagging and port-based VLAN). Using its web-based interface, administrators can set up VLANs to segregate traffic and configure link aggregation settings to create fat traffic pipelines. Additionally, these features offer extra protection on the network edge and the password-protected configuration interface can be accessed remotely.
IEEE 802.3af/at PoE compliant.
Eight Gigabit Ethernet ports.
Up to 30W per port (total power budget: 150W) for powering PoE-enabled devices.
Auto-detection of powered devices (PD) and power consumption levels.
Auto fault-detection on over/under current & voltage.
Access Control List (ACL) support.
Switch capacity:16Gbps & Forwarding rate:11.9Mpps.
IEEE 802.1Q-based VLAN for network segmentation to improve performance and security.
IEEE 802.1p QoS with 4 priority queues
IGMP Snooping V1 / V2 / V3 support.
4K MAC address table and jumbo frame support up to 9KB.
19-inch 1U rack-mount brackets included.
Ports: 8 Port RJ-45 10/100/1000Base-T PoE+ Ports
Transmission Method: Store and Forward
Buttons: Reset Button
Per Port: Link/Act
PoE: Act / Status
Per Unit: Power
Power Input: 100-240V AC, 50-60 Hz, Internal power supply
Total Power Budget: 150W
Dimensions(L x W x H): 265 × 184 × 44 mm
Switching Capacity: 16Gbps
Forwarding Rate: 11.9Mpps
MAC Address: 4K
Buffer Memory: 192KB
Jumbo Frames: 9.6KB
Filtering/Forwarding Rates: 1000Mbps port – 1,488,000pps, 100Mbps port – 148,800pps, 10Mbps port – 14,880pps
Power over Ethernet:
Standard: IEEE 802.3af, IEEE 802.3at
Power Output: Up to 30W per port
Pin Assignment: 1/2(+), 3/6(-) End-Span (mode A)
Available Power Budget: 130W, (Port 1 to 4 = 65W) & (Port 5 to 8 = 65W)
Management: PoE output on/off management
VLAN: Up to 8 VLANs and 4096 VLAN IDs, 802.1Q tag-based VLAN, Port-based VLAN
Port Trunking: IEEE 802.3ad LACP Trunk up to 1 trunk groups
IGMP snooping: IGMP v1/v2/v3 snooping, Block unknown multicast traffic, Multicast groups: 20
QoS: Port-based QoS, IEEE802.1p QoS, 4 Priority Queues, scheduling algorithm
User Interface: Web-based Management
User Account: Login account configuration
Firmware Upgrade: Firmware Upgrade by WEB
Security: Broadcast Storm control
Temperature: Operating: 0 ~ 50/ Storage: -40 ~ 70
Humidity (Non-condensing): Operating: 10 ~ 90%/ Storage: 10 ~ 90%
Standards: IEEE 802.3 10BaseT Ethernet, IEEE 802.3u 100BaseTX Fast Ethernet, IEEE 802.3ab 1000BaseT Gigabit Ethernet, IEEE 802.3x Full-duplex and Flow Control, IEEE 802.3ad Link Aggregation Control Protocol (LACP), IEEE 802.3az Energy Efficient Ethernet, IEEE 802.1Q VLAN, IEEE 802.1p Quality of Service (QoS), IEEE 802.3af Power Over Ethernet (PoE), IEEE 802.3at Power Over Ethernet Plus (PoE+)
Certifications: FCC Class A, CE
1 x Edimax Pro 8-Port Gigabit PoE+ WebSmart Switch (150W)
Orders are usually processed within 48 hours of submission.
We are able to arrange shipping to most of Australia.
Please refer to our FAQ page regarding locations that we may not be able to provide delivery.
Our FAQ page is here: https://jwgsupplies.com/en/about-and-faq/
We distribute online only, please do not ask for pick up.